文献知网节
摘要:In this study,the(Fe,Cr)7C3 particles strengthened gradient composite was produced by in situ synthesis process with subsequent heat treatment from gray cast iron(HT300) and high purity chrome plate.The microstructure,phase composition and wear resistance of the composite were studied by scanning electron microscopy(SEM),X-ray diffraction(XRD) and scratch tester.The results showed that the thickness of the gradient layer was about 758 μm after heat treatment at 900 ℃for 4 h.And it can be divided into three areas depending on microstructure.The outermost layer which was ~60 μm of thickness,was the dense ceramic layer with high volume fraction of(Fe,Cr)7C3 ~90%.No obvious grain boundaries were observed.The subsurface layer was the particles dispersed layer,which was ~525 μm of thickness,with the volume fraction of(Fe,Cr)7C3 decreased to 70%.The lowermost layer was ferrite,with about 173 μm thickness.A good metallurgical bond generated between the composite layer and matrix.The depth and the width of surface scratch increased with the raising loads from 0 to 100 N,and the cracks mainly included micro-crack,tiny dens crack,mixture crack and through-wall crack.The(Fe,Cr)7C3 particles were broken and scraped when the load exceeded 80 N.
会议名称:

The 2nd International Conference on Materials Science and Engineering Technology (MSET 2015)

会议时间:

2015-04-25

会议地点:

中国上海

  • 专辑:

    工程科技Ⅰ辑

  • 专题:

    无机化工; 材料科学

  • 分类号:

    TQ174.1;TB33

  • 手机阅读
    即刻使用手机阅读
    第一步

    扫描二维码下载

    "移动知网-全球学术快报"客户端

    第二步

    打开“全球学术快报”

    点击首页左上角的扫描图标

    第三步

    扫描二维码

    手机同步阅读本篇文献

  • CAJ下载
  • PDF下载

下载手机APP用APP扫此码同步阅读该篇文章

温馨提示:阅读CAJ格式原文,请使用CAJ浏览器

下载:2 页码:698-702 页数:5 大小:706k

引文网络
  • 参考文献
  • 引证文献
  • 共引文献
  • 同被引文献
  • 二级参考文献
  • 二级引证文献
  • 批量下载
相关推荐
  • 相似文献
  • 读者推荐
  • 相关基金文献
  • 相关法规
  • 关联作者
  • 相关视频